Thursday, September 27, 2018

Project Update

Click any image to enlarge

Our project goes on. After the aft cabin we now have been working on the forward cabin.

wingssail images-fredrick roswold
Now we tear into the bow

The black hole of Calcutta

Meanwhile, on the deck:

We found a soft spot where the deck was a little bouncy. It wasn't big, and maybe it has been there a long time and we just didn't notice it, but when I did some testing I discovered a large area which was definitely bad inside. It has to be fixed.

wingssail images-fredrick roswold
Cut out the bad

When you find softness in the deck, you have to cut it out.

Ugly, Ugly

Rotten, rotten, rotten

Almost cleaned up

Now put in new wood

Top Skin Back on

Preliminary Fairing

Almost Done

Here we have finished the fairing, primered and painted the deck, with antiskid compound, and installed the hatch. When we repaint the whole deck (next Project) it will finish this part.

Starting Starbord Side

So, onward with deck painting. First we painted the winch area near the cockpit.

Masking

Painted side deck

Paint Looks Good

Close up

We have a nice texture using Grip-Tex, hopefully this will keep all of our crew onboard this season.

New Winch in Place

The winch revision is complete: We moved the Barient 28 3-speed winches back to the main sheet and installed new (used) Barient 28 two speed winches for the secondaries. This will give us much more power and faster sheeting on the main, and the secondaries never needed to be 3-speed in the first place. In fact we originally had 2-speed winches there. Now we're just back to original.

In this photo the winch drum is sitting alongside the 2-speed winch waiting to be placed on the frame.



Labels: , ,

0 Comments:

Post a Comment

<< Home

NEXT Page (More) , or... GO BACK to Previous Page